Gate Valve Installation and Use
Release time:
2021-11-12
1. The gate valve is a shut-off valve, and its sealing performance is not as good as that of a globe valve. The main "responsibility" of the gate valve is to "cut off the flow".
1. The gate valve is a shut-off valve, and its sealing performance is not as good as that of a globe valve. The main "responsibility" of the gate valve is to "cut off the flow" and to allow "continuation of flow" with minimal resistance. It is not suitable for regulating the flow and pressure of the medium; if used for long-term regulation, the sealing surface can be worn and damaged by the medium, affecting sealing performance. The temperature and pressure of the medium in the gate valve should be noted for reliability of use. At high temperatures and pressures, changes in temperature may cause the gate to seize, and due to uneven medium temperatures, sealing issues may easily arise. This is particularly evident in wedge-type gate valves.
2. Gate valves can be installed on horizontal or vertical pipelines. Single and double gate plate valves should be installed on horizontal pipelines, and the handwheel should be located above the valve, not allowed to be installed facing downwards. The flow direction of the medium in the gate valve is not restricted. Gate valves typically use flange connections, and in special cases, welded connections are also used.
3. For large diameter and high-pressure gate valves, the opening and closing torque is relatively large. To reduce the opening and closing torque, a bypass valve can be installed. The bypass valve is installed outside the main gate valve, and its inlet and outlet are connected to both sides of the main gate valve in parallel. The bypass valve should be opened before the main gate valve is opened, allowing the pressure difference before and after the gate plate of the main gate valve to decrease, thereby reducing the opening torque of the main gate valve. The selection of the bypass valve diameter should consider the diameter of the main valve and the usage requirements.
Related News
2020-06-05
2020-04-28